Milwaukee MC125 Multifunction pH-ORP controller

Description

With Milwaukee's MC Controllers you can monitor and control pH and/or ORP levels.
The Milwaukee Instruments "MC" Controllers have a user selectable set point and a visual "Power Activated" LED notification light. Power to the controller box is turned on when the reading is Above or Below ( user selected ) the selected set point. These MC Controllers are ideal for CO2 or ozone dosing.
With each Milwaukee Smart controller, your aquarium will have the individual attention that it needs.
Each unit comes with 12 VDC adapter, mounting kit, probe, probe holder and starter calibration solution for pH. (factory calibrated for ORP)
Smart Professional pH/ORP controller.
User selectable Hi/Low Set Point
Manual 2 points calibration
Visual LED alarm
Supplied with 12 VDC adapter and mounting kit
1 power plug for CO2 dosing and 1 power plug for O3 dosing
Double junction pH electrode and platinum ORP electrode (BNC connector)
SPECIFICATIONS
pH Range
0.00 - 14.00 pH
ORP Range
± 1000mV
pH Resolution
0.01 pH
ORP Resolution
± 1 mV
pH Accuracy
± 0.2 pH
ORP Accuracy
± 5 mV
Calibration
Manual 2 points
Alarm
Active when reading is higher or lower than set point
pH Dosing Contact
1 power plug for CO2 dosing
ORP Dosing Contact
1 power plug for O3 dosing
pH Electrode
MA911B/2 (included)
ORP Electrode
MA921B/2 (included)
ACCESSORIES
MA911B/2
Double junction, gel filled pH electrode with 2 m cable
MA921B/2
Double junction, gel filled ORP electrode with platinum sensor, BNC connector, 2 m cable
M10004B
pH 4.01 buffer solution 20 mL sachet (25 pcs)
M10007B
pH 7.01 buffer solution 20 mL sachet (25 pcs)
M10010B
pH 10.01 buffer solution 20 mL sachet (25 pcs)
MA9015
Electrode storage solution 20 mL sachet (25 pcs)
M10000B
Electrode rinse solution 20 mL sachet (25 pcs)
MA955
Solenoid valve with 1.5 m cable
ORDERING INFORMATION
MC125 is supplied with 12 VDC adapter and mounting kit.